Skip to navigation Skip to content

Categories

Loading�
Searching...

Products

Loading�
Searching...

Content

Loading�
Searching...
Skip to blog content

A Complete Guide to Shower Screen Sizes

Ask a few people what size their shower screen is and the answers will rarely match. One gives you a width, another a height, and someone else says it came with the bathroom.

A tiler can trim a bathroom tile and a plumber can shorten a pipe to fit, but a toughened glass shower screen arrives at its size and stays there, so the size needs to be right before you buy.

This guide covers shower screen sizes and what they mean, basic measurements and how to choose the right one for your bathroom space. 

 

What is a shower screen?

A shower screen is a single panel of toughened glass that keeps water in your shower area and away from the rest of the bathroom.

Glass panels are the modern alternative to shower curtains. They keep the light bouncing around your bathroom and are much easier to keep clean and hygienic too.

Which type of shower screen are you looking for?

Shower screens is a term that can describe a few different things and each is sized differently.

The table below shows the types of screen and the typical sizes of each.

Type What’s it called Typical size range
A glass panel, wall fixed or freestanding, with an open doorway into the shower Shower screen (walk-in or wetroom) 600 to 1400 mm wide, 1850 to 2100 mm tall
Glass screen along the edge of a bath that has a shower over it Bath screen 350 to 1080 mm wide, 1400 to 1600 mm tall
A door and glass panels forming a box around a shower tray Shower enclosure 800 x 1400 mm wide, 1850 x 2100 mm tall
A door into a shower area that’s otherwise enclosed Shower door 600 to 1700 mm wide, 1850 to 2100 mm tall

If you’re looking for more information on bath screens or shower enclosures, you can read our in-depth guides below:

Wall fixed and freestanding shower screens

A wall fixed screen is attached to the wall along one edge. It slots into a wall profile which is a slim metal channel screwed into the wall.

The bottom edge of the shower screen sits on a waterproof floor if it’s a wetroom or just inside the edge of a large shower tray for a walk-in shower. If your screen is a bath screen, it will sit along the edge of your bath. 

Freestanding shower screens are a bit different. They stand away from the walls giving a truly open plan design. The glass sits on the floor or a shower tray and is held upright by support bars fixed to the wall or ceiling. This allows for both ends of the shower to be open so you can walk into the shower area from either side.

Some wall fixed shower screens also come with a support bar for extra stability. Our Harbour i8 shower screen range for example, comes with a 1m support arm that can be cut down to the exact size for your shower space.

Frameless and framed shower screens

A frameless shower screen has no frame around the glass. A framed shower screen has a metal border that surrounds the edge of the glass. Frames come in finishes like matt black, chrome and brushed brass and can easily be matched to the rest of your bathroom.

Frameless screens have to be strong enough without a metal frame to stay stable. This is why shower screens are generally made from thicker glass than the glass in a full framed shower enclosure.

The usual thickness is 8 mm but some can be up to 10 mm. Many shower screens also come with an easy clean coating which can help keep the cleaning routine quick and easy.

Thicker glass does feel more solid but it’s heavier too. That’s worth thinking about if the screen has to go up a flight of stairs to get into your bathroom.

Shower screens are all toughened safety glass. If it were to break, instead of long shards of sharp glass, it shatters into tiny blunt pieces making any damage or breakage much safer.

What are the standard shower screen sizes?

There’s no official UK standard for shower screen sizes but they generally range from 600 to 1400 mm wide, which takes you from a compact panel for a small en-suite to a broad glass panel across a family wetroom.

Shower screens come in set widths rather than every size in between, so you’re choosing the closest one that fits your space. 

Shower screen heights typically run from 1850 to 2100 mm and the aim is for them to be tall enough to stop spray from the shower going over the top.

Working out the shower screen size you need

The shower screen width you need is driven by the size of your shower tray or shower floor space. The further along the glass reaches, the more shower spray it keeps in.

Our Harbour i10 10mm easy clean wetroom panel is available in eight sizes from 600 mm to 1200 mm. Attaching to the wall on one side with a stabilising bar included, this model gives a minimalist look with a modern matt black finish.

With a two-panel shower screen pack, like our Harbour i8 8mm 2m Tall Easy Clean Wetroom 2 Panel Pack, the panels form two sides of the shower with an open doorway between them. 

With two shower screen panels, the gap between them is your way into the shower, so check it’s wide enough to step through comfortably.

For the height of your shower screen, think about where the water is coming from. A showerhead mounted high on the wall or in the ceiling can influence how water sprays or bounces when the shower is being used. For these showerheads, a taller screen might be needed.

Your own height counts too, since spray bounces off a taller person from higher up. A powerful shower will also throw water further, so a wider screen or a return panel may help.

What is a return panel and do you need one?

A return panel catches the spray that might otherwise get past the end of the main shower screen. They are also sometimes called deflector or flipper panels. 

Some are fixed in place and some are hinged so they can be moved to give more space and easier access into the shower area.

Many shower screen models offer a return panel as an optional extra and they can start at widths around 250 mm and match the main screen’s height.

What does shower screen adjustment mean?

Most bathroom walls are not perfectly straight and shower screens are built to account for that.

When the glass panel slots into the wall profile, it can sit a little further in or out of the channel. That movement is called adjustment and helps you to get the best fit.

Shower screen product pages will give an adjustment figure, 15 mm is common, which means the glass screen has 15 mm of movement to find the right fit. 

The size on the product page is the widest the screen can reach. So a 900 mm shower screen with 15 mm of adjustment can be set anywhere between 885 and 900 mm, and it covers a space of 890 mm just as well as one of 900 mm.

Measuring for a shower screen, the basics

Three measurements can help to narrow down your choice.

The size of your shower tray or shower area: This lets you know the width of the shower screen you need for your shower space.

The height: Measure from the finished wetroom floor or shower tray to where you want the top of the shower screen glass to be, and choose from the 1850 mm to 2100 mm range.

How far your wall might be out: Rest a spirit level upright against the wall where the glass will fix onto, and measure the biggest gap behind it. If that’s more than the screen’s adjustment, look for a shower screen with a larger adjustment range.

When looking for a shower screen, once you have the sizing right, you can focus on the style and the look you’d like for your bathroom.

Shower screens come in a range of finishes from matt black to chrome, brass and gold and dark grey in framed and frameless designs.

Once the shower screen arrives, our how to fit a shower screen article takes you through installing your new screen plus some advice for installing bath screens. 

A few more common questions that we get asked are answered for you below.

Frequently Asked Questions

Explore our full range

Thinking about an open-plan layout? Read our guide to wetrooms.

You might also like

Back to top