-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
This mini mixer tap offers a perfect balance of contemporary design, energy efficiency, and quality. Compact and stylish, it comes with a matching slotted click-clack waste, making it an ideal choice for smaller basins and cloakrooms. The knurled detailing adds a modern, intricate touch while providing a secure grip for easy operation. Equipped with cold start technology, the tap conserves energy by only heating water when needed, making it an environmentally friendly option. WRAS-approved, it adheres to strict water safety and performance standards, ensuring reliable water quality. The included flexi tails allow for quick, hassle-free installation, and the ten-year manufacturer’s guarantee ensures lasting durability, making this tap both stylish and efficient for compact spaces.
- Mini basin mixer tap available in 5 finishes: Brushed Brass, Brushed Bronze, Chrome, Gunmetal & Matt Black
- Perfect for smaller spaces and cloakroom basins
- Knurled detailing adds modern elegance to the design
- Single lever control allowing for easy adjustment of water temperature and flow with one hand
- Brass body and zinc alloy handle providing durability and antibacterial properties
- Cold start technology saves energy by only heating water when needed
- Ceramic disc technology prevents any unwanted leaks or drips
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Minimum 0.5 bar water pressure
- Complies with BS6920 and BSEN200
- WRAS approved
- Includes flexi tails for quick and easy installation
- Includes matching slotted click clack basin waste
- Complements the Harbour Clarity range
- 10 year manufacturer’s guarantee
| Cleaning Instructions |
|---|
| Product Code | h-cl-knrl-mini-mono-bsn-m-tp |
|---|---|
| Type | Basin Mixer Taps, Cloakroom Basin Mixer Taps |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
| Waste TypeMore information | Click Clack Waste |
| Popular Features | Waste Included, WRAS Approved |
| Material | Brass, Zinc Alloy |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
The waste in your basin will allow the water in your sink to safely flow down the drain. There are two main types of waste available: slotted & unslotted.
If your basin has an overflow you will need a slotted waste. If your basin doesn’t have an overflow, you will need an unslotted waste.
For a full explanation of the types of basin waste available, take a look at our comprehensive guide.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | Curved Spout, Fixed Spout |
| Finish Texture | Select an option first |
| Finish | Select an option first |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 35 |
|---|---|
| Height (mm) | 147 |
| Depth (mm) | 134 |
| Projection (mm) | 100 |
| Flow Rate at 0.5 Bar (l/min) | 3 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 4.5 |
| Flow Rate at 1.5 Bar (l/min) | 5.3 |
| Flow Rate at 2 Bar (l/min) | 6.4 |
| Flow Rate at 3 Bar (l/min) | 8.5 |
| Flow Rate at 4 Bar (l/min) | 9.8 |
| Flow Rate at 5 Bar (l/min) | 11.1 |
| Minimum Water PressureMore information | 0.5 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
