-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
If you have the space to install a bidet in your bathroom, you should definitely do so. And if you have installed a bidet, it's time to look into choosing a bidet tap.
Mixer taps, which are the preferred taps for most basins and baths today, are practically a must-have when it comes to bidets. The Curvo bidet mixer tap with waste, completed with clever ceramic disc technology, makes it easy to control the pressure and temperature of the water flow. This beautiful finishing touch to your bidet is made out of chrome plated brass and comes with 10 years manufacturer guarantee.
Features:
Dimensions:
Mixer taps, which are the preferred taps for most basins and baths today, are practically a must-have when it comes to bidets. The Curvo bidet mixer tap with waste, completed with clever ceramic disc technology, makes it easy to control the pressure and temperature of the water flow. This beautiful finishing touch to your bidet is made out of chrome plated brass and comes with 10 years manufacturer guarantee.
Features:
- Bidet mixer tap with clicker waste included
- Made from brass with a hand polished chrome plated finish
- Ceramic disc technology makes the lever easy to use while keeping your tap drip free when not in use
- Suitable for low, medium, and high pressure systems - minimum 0.2 bar required
- WRAS approved
- 10 year manufacturer's guarantee
Dimensions:
- Width: 50mm
- Height: 132.8mm
- Projection: 122mm
Cleaning Instructions |
---|
Product Code | VEL-XCBID |
---|---|
Type | Bidet Taps |
Brand | Vellamo |
Brand Range | Vellamo Curvo |
GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Ceramic Disc |
---|---|
Popular Features | Waste Included |
Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Shape | Round |
---|---|
Mounting Type | Deck Mounted |
Finish Texture | Polished |
Finish | Chrome |
Style | Modern |
Tap Holes | Mono |
Handle Type | Lever, Single Control |
Spout TypeMore information | Fixed Spout, L-Shaped Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
Width (mm) | 50 |
---|---|
Height (mm) | 133 |
Projection (mm) | 122 |
Minimum Water PressureMore information | 0.2 |
---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Need more help?
Products from the same range
You may also like
Customers also bought
Related categories
The Drench difference
Advice guides
-
5 Reasons Why Your Bathroom Needs a Bidet
The bidet is a universal fixture found in the Middle East, Asia and Europe. In fact, 97% of Italian households have one yet they are far less common in the UK. There a few good reasons to own a bidet, so here’s what us Brits are missing out on and why bidets are practical and can provide excellent benefits to our well being and finances.