-
Click the image to zoom
-
Click the image to zoom
£222.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Vado Life Mono Bidet Mixer
If you're looking for high-end performance and quality design, then the Life mono bidet mixer from Vado will give you the helping hand you're looking for. Finished in a high-shine, but protective chrome finish the Life bidet mixer has a neutral design which will suit all bathrooms environments, modern or traditional, with similar chrome fixtures. The spout is angled for ease of use while the single lever is easy to operate.
An aerator is included within the spout to deliver smooth and evenly distributed bubbly water. Spout aerators are perfect for hard water areas and can save you a few pennies here and there, the water flow is distributed with bubbles and not forced through in excess. The featured ceramic cartridge helps to keep the single, ergonomic lever durable and glitch free for ease of use and ensures water is shut off fully, leaving you with no annoying drips. An extremely helpful H2Eco flow regulator can also be purchased with the Life bidet Mixer, specially created by Vado the H2Eco helps reduce money and your carbon foot print.
The H2Eco practically controls water flow without cutting corners on water pressure performance. This can be purchased as an additional low-cost item and has the potential to save you up to £360 in one year ! A well worthy investment. With Vados' confident 15 year guarantee the Life mono bidet mixer will be by your side for years to come.
Features:
An aerator is included within the spout to deliver smooth and evenly distributed bubbly water. Spout aerators are perfect for hard water areas and can save you a few pennies here and there, the water flow is distributed with bubbles and not forced through in excess. The featured ceramic cartridge helps to keep the single, ergonomic lever durable and glitch free for ease of use and ensures water is shut off fully, leaving you with no annoying drips. An extremely helpful H2Eco flow regulator can also be purchased with the Life bidet Mixer, specially created by Vado the H2Eco helps reduce money and your carbon foot print.
The H2Eco practically controls water flow without cutting corners on water pressure performance. This can be purchased as an additional low-cost item and has the potential to save you up to £360 in one year ! A well worthy investment. With Vados' confident 15 year guarantee the Life mono bidet mixer will be by your side for years to come.
Features:
- Mono bidet mixer tap
- Chrome finish
- Spout aerator
- Ceramic cartridge
- Water flow aerator
- H2Eco flow regulator (optional extra)
- 1 Bar minimum water pressure required
- Waste sold separately
- 15 year guarantee
Dimensions:- Height: 145mm
- Depth: 134mm
- Projection: 110mm
| Product Code | LIF-110/SB-C/P |
|---|---|
| Type | Bidet Taps |
| Brand | Vado |
| Brand Range | Vado Life |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Curved, Square |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Chrome |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | L-Shaped Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Height (mm) | 145 |
|---|---|
| Depth (mm) | 134 |
| Projection (mm) | 110 |
| Flow Rate at 1 Bar (l/min) | 8 |
|---|---|
| Flow Rate at 2 Bar (l/min) | 14 |
| Flow Rate at 3 Bar (l/min) | 17 |
| Flow Rate at 4 Bar (l/min) | 20 |
| Flow Rate at 5 Bar (l/min) | 22 |
| Minimum Water PressureMore information | 1 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
