Skip to navigation Skip to content

Ideal Standard Ceraplan Bidet Mixer Tap with Pop-Up Waste

No reviews yet - Write one

RRP £170 save 27%


Loading delivery estimate...

Pay 3 interest-free instalments of £41.33 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £31.00 with Clearpay Learn more about Clearpay

What's great about it?

  • High quality chrome plated brass finish for a modern design
  • FirmaFlow® ceramic disc cartridges save you money on your water bill
  • Economic aerator to help reduce excess water
  • Suitable for high pressure water systems
  • 5 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Ideal Standard Ceraplan Bidet Mixer Tap with Pop-Up Waste

  • Beautiful bidet mixer tap with pop-up waste in stunning silk black
  • Made from brass with a chrome plated finish to add a modern touch to your bathroom
  • FirmaFlow® uses improved Click Technology with a mechanical stop to limit tap water flow to just the amount required and assists in maintaining flow consistency, while reducing usage by up to 50%
  • FirmaFlow® also uses ceramic disc cartridges which will save you money on your water bill and provide you with superior safety
  • LightMove® technology helps provide finer temperature adjustment between 34°C and 42°C, ensuring easier handle movement and control
  • Temperature limit stop is an adjustable setting that controls and limits the water temperature to your preference to avoid scalding. Ideal for family homes and provides peace of mind
  • Economic 5L/min aerator - this is an environmentally friendly, removable feature which limits the maximum flow rate whilst fusing air into the water flow. This results in a soft and bubbly flow of water
  • EasyFix® system allows one-man installation thanks to the preassembled components that ensures a faster, hassle-free installation and saves up to 30% of the installation time
  • WRAS approved - this product is certified in compliance with the Water Regulations Advisory Scheme. To find out more information of the WRAS approval scheme, please see our blog post here
  • Comes with flexible tails to simplify and speed up installation
  • Suitable for all water systems including high pressure systems
  • SmartShine® finish makes it easier than ever to clean thanks to the smooth lines and absence of recesses
  • 5 year manufacturer's guarantee

  • Height: 146mm
  • Width: 47mm
  • Depth: 143mm
  • Projection: 94mm

PDF Product PDF
Product Overview
Product Code BD249AA
Type Bidet Taps
Brand Ideal Standard
Brand Range Ideal Standard Ceraplan
GuaranteeMore information 5 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Cartridge TypeMore information Ceramic Disc
AeratorMore information Yes
Waste TypeMore information Pop-Up Waste
Popular Features Waste Included, WRAS Approved
Material Brass
Temperature Control Manual

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.

The waste in your basin will allow the water in your sink to safely flow down the drain. There are two main types of waste available: slotted & unslotted.

If your basin has an overflow you will need a slotted waste. If your basin doesn’t have an overflow, you will need an unslotted waste. 

For a full explanation of the types of basin waste available, take a look at our comprehensive guide.

Shape Curved, Square
Mounting Type Deck Mounted
Finish Texture Polished
Finish Chrome, Polished Chrome
Style Modern
Tap Holes Mono
Handle Type Lever, Single Control
Spout TypeMore information Fixed Spout, Straight Spout

Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.

Width (mm) 47
Height (mm) 146
Depth (mm) 143
Projection (mm) 94
Flow Rate
Flow Rate at 0.2 Bar (l/min) 1.4
Minimum Water PressureMore information 0.2

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

No reviews yet - Write one


Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.