-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Fancy something a little different when it comes to your bath or basin design? Pair a VOS brushed brass overflow bath filler or bath / basin spout with these elegant VOS panel on/off valves for the ultimate minimalist contemporary design. Constructed from brass with a sleek PVD brushed brass finish, these deck mounted valves boast a simplistic yet stylish design that give you full control over your water flow and temperature, without needing to take up loads of space on your basin or bath deck.
Complete your brushed brass bathroom look by pairing various elements of the VOS brushed brass range together, and rest easy knowing that they’re all of durable, reliable quality thanks to that rather reassuring 15 year manufacturer’s guarantee.
Features:
Dimensions:
Complete your brushed brass bathroom look by pairing various elements of the VOS brushed brass range together, and rest easy knowing that they’re all of durable, reliable quality thanks to that rather reassuring 15 year manufacturer’s guarantee.
Features:
- Deck mounted on/off valves
- Constructed from brass with a PVD finish
- Can be paired with either a spout or overflow bath filler, please see our recommended extras
- 15 year manufacturer's guarantee - (subject to online registration - please click here for further details)
Dimensions:
- Height: 45mm
- Width: 75mm
| Product Code | 23809BBR |
|---|---|
| Type | On/Off Valves |
| Brand | Just Taps |
| Brand Range | VOS Brushed Brass |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| Material | Brass |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Shape | Round |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Brushed |
| Finish | Brushed Brass |
| Style | Modern |
| Width (mm) | 75 |
|---|---|
| Height (mm) | 45 |
| Projection (mm) | 45 |
| Minimum Water PressureMore information | 0.5 |
|---|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
