-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Complete your dream shower design with the Crosswater MPRO Industrial crossbox 1 outlet thermostatic shower valve. This elegant shower valve boasts a timeless chrome finish and beautifully complements the full MPRO Industrial chrome range. If it’s a minimalist aesthetic you’re after, this Crosswater valve promises the quietest possible shower experience and a compact design for a touch of elegant simplicity.
The built in easy switch allows for a fast and hassle-free flow reversal, whilst improved flow dynamics allow a 90 degree elbows to be fitted directly to the outlets for added convenience. Packed full of wonderful features and promising simplistic control of one outlet of your choice, this beautiful concealed Crosswater valve even comes with a 15 year manufacturer’s guarantee for peace of mind.
Features:
Please note: Pair with other products within the range to maintain the same finish
The built in easy switch allows for a fast and hassle-free flow reversal, whilst improved flow dynamics allow a 90 degree elbows to be fitted directly to the outlets for added convenience. Packed full of wonderful features and promising simplistic control of one outlet of your choice, this beautiful concealed Crosswater valve even comes with a 15 year manufacturer’s guarantee for peace of mind.
Features:
- Crossbox shower valve features all the benefits of a standard recessed valve but has additional benefits
- One outlet shower valve
- Compact design
- 3 finish options: Matt Black, Polished Chrome or Unlacquered Brass
- Crosswater's quietest possible shower valve
- Quick and easy installation
- Slim 60mm minimum installation depth provides reduced preparation time
- Simple 2 stage fixing allows installation of wall-mounted components and final trim separately
- Front or rear mounting options to ease installation and flexibility
- Built-in 'easy switch' thermostatic module allows for simple, quick flow reversal
- Improved flow dynamics allow 90-degree elbows to be fitted directly to outlets
- Portrait mounted only
- Minimum water pressure required: 1 bar
- Wall mounted shower handset sold separately - please see our recommended extras
- 15 year manufacturer's guarantee (subject to online registration - please click here)
Please note: Pair with other products within the range to maintain the same finish
Product Code | xwater-mpro-1-shower-valve-pv |
---|---|
Type | Concealed Shower Valves |
Brand | Crosswater |
Brand Range | Crosswater MPRO |
GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Ceramic Disc |
---|---|
Number of OutletsMore information | 1 Outlet |
Popular Features | WRAS Approved |
Temperature Control | Thermostatic |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
Shape | Round |
---|---|
Mounting Type | Wall Mounted |
Style | Modern |
Orientation | Portrait |
Handle Type | Dual Control, Round |
Finish Texture | Select an option first |
Finish | Select an option first |
Width (mm) | 150 |
---|---|
Height (mm) | 150 |
Projection (mm) | 152 |
Flow Rate at 1 Bar (l/min) | 11.7 |
---|---|
Flow Rate at 2 Bar (l/min) | 16.7 |
Flow Rate at 3 Bar (l/min) | 20.7 |
Flow Rate at 4 Bar (l/min) | 24 |
Flow Rate at 5 Bar (l/min) | 26.6 |
Minimum Water PressureMore information | 1 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.