We've hand-picked these items because they are a great choice alongside the Vellamo Venta Waterfall Basin Mixer Tap & Waste
Ceramic disc technology and a solid brass body mean that this tap was built with longevity in mind, which is echoed by the manufacturer's 10 year guarantee.
- Open spout waterfall design
- Ceramic disc technology to ensure for no leaks
- Includes free slotted basin waste and flexi-tails
- High quality chrome finish for a sleek modern look
- 0.2 bar minimum water pressure required
- Comes with a 10 year guarantee
- Height: 138.5mm
- Width: 54mm
- Depth: 131mm
- Projection: 104mm
|Global Trade Item Number||5056585239071|
|Type||Basin Mixer Taps|
|Brand Range||Vellamo Venta|
|GuaranteeMore information||10 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Single Control|
|Spout TypeMore information||Waterfall Spout|
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Flow Rate at 0.2 Bar (l/min)||6.4|
|Flow Rate at 0.5 Bar (l/min)||8.7|
|Flow Rate at 1 Bar (l/min)||11.8|
|Flow Rate at 1.5 Bar (l/min)||14.3|
|Flow Rate at 2 Bar (l/min)||16.5|
|Flow Rate at 3 Bar (l/min)||19.8|
|Minimum Water PressureMore information||0.2|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.