Skip to navigation Skip to content

The Tap Factory Vibrance Brushed Brass Deck Mounted Bath Filler - 6 Handle Colours Available

No reviews yet - Write one

RRP £279.00 save 28%

From £199.99

Please select an option

Receive as soon as Saturday

Select an option to see delivery estimates

What's great about it?

  • 6 different handle colours to choose from
  • Sleek, modern design with a gorgeous brushed brass finish
  • Suitable for all water systems including low pressure gravity-fed
  • Minimum 0.5 bar water pressure required
  • Ceramic disc technology ensures a smooth operation with no dripping once you've turned it off

Read full product description

The Tap Factory Vibrance Brushed Brass Deck Mounted Bath Filler - 6 Handle Colours Available


Features:
6 different handle colours to choose from allowing you to really customise your bathroom
Contemporary designed bath filler with an 'on trend' brushed brass finish
Suitable for all water systems including gravity fed
Minimum 0.5 bar water pressure required
Ceramic disc technology makes the tap easy to use and it won't drip once you've turned it off
• Matching basin tap available

Dimensions:
Overall height: 145mm
Spout exit height: 81.5mm
Projection: 115mm
Product Code tf-vibrance-brass-bath-tap-pv
Type Bath Fillers
Brand The Tap Factory
Brand Range The Tap Factory Vibrance
Minimum Water PressureMore information 0.5
Finish Brushed Brass
Style Modern
Tap Holes 2 Holes
Mounting Type Deck Mounted
Handle Type Lever, Dual Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 145
Depth (mm) 135
Projection (mm) 115
GuaranteeMore information 2 Years

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.