We've hand-picked these items because they are a great choice alongside the Pura DV8 Eco Basin Mixer Tap with Waste
Made out of chrome plated brass, the DV8 eco mini basin mixer tap has been made using fewer materials, reducing it's carbon footprint and making it an ethical choice for the conscious consumer. To top it all off, it comes with 10-year manufacturer guarantee.
- Eco mini basin mixer tap supplied with clicker waste
- Made from brass with a hand polished chrome plated finish
- Ceramic disc technology makes the lever easy to use while keeping your tap drip free when not in use
- Suitable for low, medium and high pressure systems - minimum 0.2 bar required
- 10 year manufacturer's guarantee
- Height: 130mm
- Depth: 150mm
- Projection: 110mm
|Global Trade Item Number
|Basin Mixer Taps
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Lever, Single Control
|Spout TypeMore information
|Straight Spout, Fixed Spout
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
If you're unsure on the specifics of how to descale and clean your tap cartridge, look no further than this handy guide. You're bound to be an expert on cleaning tap cartridges at the end of this article so knuckle down and get ready for some super useful knowledge!
Nowadays, the vast majority of modern bathroom and kitchen taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off.