We've hand-picked these items because they are a great choice alongside the Inox Brushed Stainless Steel Wall Mounted Single Lever Basin Mixer
Forgo the overwhelming varieties of other brushed stainless steel taps and instead opt for a pure brushed stainless steel tap that is extremely durable and also resistant to finger print marks. Furthermore this exquisite designer bathroom tap operates with a ceramic disc which helps to ensure an effortless water flow that also eliminates any visible leaks or drips. Simply lift the gorgeous lever to turn on and control your new tap. Also included with this product is a handy 10 year manufactures guarantee to help ensure total confidence in this product.
- Wall mounted basin mixer
- 1 bar minimum water pressure required
- Brushed stainless steel finish
- Made from pure stainless steel
- Ceramic disc cartridge
- Waste sold separately
- 10 year manufacturers guarantee - (subject to online registration - please click here for further details)
- Height: 85mm
- Projection: 250mm
|Basin Mixer Taps, Wall Mounted Basin Mixer Taps
|Just Taps Inox
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Brushed Stainless Steel
|Lever, Single Control
|Spout TypeMore information
|Curved Spout, Fixed Spout
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.