Skip to navigation Skip to content

Inox Brushed Stainless Steel Wall Mounted Basin Mixer

Rated 5.00/5 from 2 customer reviews

RRP £360.00 save 31%


In stock | Get it Thursday

Order by 4pm Wednesday and select Next Day Delivery (S)

Delivery from £3.99. Spend £500+ for free delivery*. Read full delivery info

What's great about it?

  • Modern take on a traditional style basin mixer
  • Brushed stainless steel finish
  • Wall mounted and two lever control
  • Dimensions: W270 x H70 x P194mm

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Inox Brushed Stainless Steel Wall Mounted Basin Mixer

Inox Brushed Stainless Steel Wall Mounted Basin Mixer

Just Taps prestigious range of Inox taps help to redefine modern designs in the bathroom. Offering you a range of bespoke pure brushed stainless steel taps that have been designed to be of a simplistic but dominate style. With a striking long curved spout situated between 2 crisp curved levers that will accurately control the temperature and flow of water. Also thanks to the installation of its ceramic disc cartridge it will give exceptional water flow through the spout that will also not leak.

Situate this irreplaceable wall mounted tap above any free standing, floor mounted or wall mounted basin unit to help truly complete your contemporary bathroom. Finally to go with this gorgeous designer tap is a very generous 10 year guarantee.

• Curved and modern design 3 hole basin tap
• Wall mounted and two lever control
• 1 bar minimum water pressure required
• Brushed stainless steel finish
• Made from pure stainless steel
• Ceramic disc cartridge
• Waste sold separately
• 10 year manufacturers guarantee - (subject to online registration - please click here for further details)

Height: 70mm
Width: 270mm
Projection: 194mm
Product Code ix089a
Type Basin Mixer Taps, Wall Mounted Basin Mixer Taps
Width (mm) 270
Height (mm) 70
Brand Just Taps
Brand Range Just Taps Inox
Shape Round
Mounting Type Wall Mounted
Material Stainless Steel
Cartridge TypeMore information Ceramic Disc
Finish Brushed Stainless Steel
Style Modern
Tap Holes 3 Holes
Projection (mm) 194
Minimum Water PressureMore information 1
GuaranteeMore information 10 Years
Handle Type Round, Dual Control
Spout TypeMore information Curved Spout, Fixed Spout

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.