We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial Thermostatic 2 Outlet Shower Valve - Crossbox Technology
RRP £285 Was £207.99
- Crossbox shower valve features all the benefits of a standard recessed valve but has additional benefits
- Compact design
- Two outlet shower valve
- Choice of finishes: Matt Black, Unlacquered Brass or Chrome
- Crosswater's quietest possible shower valve
- Quick and easy installation
- Slim 60mm minimum installation depth provides reduced preparation time
- Simple 2 stage fixing allows installation of wall-mounted components and final trim separately
- Front or rear mounting options to ease installation and flexibility
- Built-in 'easy switch' thermostatic module allows for simple, quick flow reversal
- Improved flow dynamics allow 90-degree elbows to be fitted directly to outlets
- Portrait mounted only
- Minimum water pressure required: 1 bar
- Wall mounted shower handset sold separately - please see our recommended extras
- 15 year manufacturer's guarantee (subject to online registration - please click here)
|Type||Concealed Shower Valves|
|Brand Range||Crosswater MPRO|
|GuaranteeMore information||15 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Wall Mounted|
|Handle Type||Round, Dual Control|
|Flow Rate at 1 Bar (l/min)||11.7|
|Flow Rate at 2 Bar (l/min)||16.4|
|Flow Rate at 3 Bar (l/min)||20|
|Flow Rate at 4 Bar (l/min)||23|
|Flow Rate at 5 Bar (l/min)||25.8|
|Minimum Water PressureMore information||1|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Showers upgrades are making our bathroom experience so much more exciting. Take a look at these 5 ways to upgrade your shower experience at home.
Not all taps on the market are the same and, more often than not, require a bit of background research before you purchase. Choose the right ones for your water pressure after reading this guide.