Skip to navigation Skip to content

Crosswater KH Zero 2 Concealed Thermostatic Shower Valve with 3 Way Diverter

No reviews yet - Write one

RRP £714 save 28%

From £515.99

Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £171.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £129.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Designed by the award winning interior designer - Kelly Hoppen MBE
  • Designer concealed thermostatic shower valve
  • Controls 3 outlets
  • Thermostatic safety controls include pre-set temperature limiter and automatic shutdown should the cold water supply fail
  • Choice of landscape or portrait orientation to suit your bathroom design

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater KH Zero 2 Concealed Thermostatic Shower Valve with 3 Way Diverter

From the award-winning interior designer, Kelly Hoppen MBE, comes the enviably stylish and utterly sophisticated Thermostatic Shower Valve to give you the ultimate control of three outlets in your bathroom. Perfect if you have a shower over bath setup with two shower handsets, or for a luxurious 3 outlet shower system. And with a two way diverter valve and separate valve for one outlet, you can run two outlets at the same time for a relaxing and immersive shower experience.

With advanced thermostatic technology, this valve has been built with safety and longevity in mind, making it the perfect choice for busy families. Ceramic disc technology is also tucked away in the valves to give you more precise and smooth control of the levers as well as ensuring your outlets remain drip free. Made from brass with a modern and durable Chrome plated finish, this shower valve is also available in portrait or landscape orientation to suit your bathroom layout.

Features:
  • Three outlet thermostatic shower valve with three levers - one to divert water to two outlets, the middle one to control the temperature and the final one to control a single outlet
  • Ceramic disc technology for smooth control and a drip-free outlet
  • Automatic shutdown if hot or cold water fails
  • Temperature limit at 42°C, which can be increased or decreased upon installation
  • Made out of solid brass a Chrome plated finish
  • Easily serviceable from the front for continued maintenance
  • Suitable for high pressure systems only - minimum 1.0 bar required
  • WRAS approved to TMV2
  • 15 year manufacturers guarantee

Dimensions:
  • Portrait: W67 x H262mm
  • Landscape: W262 x H67mm

Product Overview
Product Code KH02_3000RC-PV
Type Concealed Shower Valves
Brand Crosswater
Brand Range Crosswater KH Zero 2
GuaranteeMore information 15 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Features
Cartridge TypeMore information Ceramic Disc
Number of OutletsMore information 3 Outlets
Material Brass
Temperature Control Thermostatic

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower. 

Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.

Style
Shape Square
Mounting Type Wall Mounted
Finish Texture Polished
Finish Chrome
Style Modern
Handle Type Round, Triple Control
Flow Rate
Minimum Water PressureMore information 1

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(0)
No reviews yet - Write one

From £515.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.