Crosswater Belgravia Lever Basin Mixer Tap
Adorn the space around your beautiful, traditionally-styled basin with the Belgravia Lever Basin Mixer Tap by Crosswater. Authentically traditional, this monobloc tap features elegant ceramic levers with hot and cold ceramic decorative heads. Water will pour into your basin through the classically designed and intricately detailed spout.
And with a pop up waste included, you can pull up the lever neatly positioned at the back of the spout to empty and fill your sink with ease. And with a 15 year manufacturers guarantee, you will have ultimate peace of mind your new Belgravia tap has been built to last.
• Suitable for Low, Medium or High Pressure systems - minimum 0.2 bar water pressure is recommended
• Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
• Made from Brass with a durable Chrome plated finish
• Supplied with pop-up waste
• WRAS approved
• 15 year manufacturers guarantee
• Height: 158mm
• Width: 241mm
• Projection: 122mm
|Global Trade Item Number||5055833618453|
|Type||Basin Mixer Taps|
|Brand Range||Crosswater Belgravia Lever|
|Minimum Water PressureMore information||0.2|
|Spout TypeMore information||Curved Spout, Fixed Spout|
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Dual Control|
|Cartridge TypeMore information||Ceramic Disc|
|Popular Features||Ceramic Disc Technology, Waste Included|
|GuaranteeMore information||15 Years|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.