Burlington Claremont Bidet Mixer Tap with Pop Up Waste
From Burlington's Claremont tap range, this Bidet Mixer Tap with Pop Up Waste will complete the look you've always dreamed of. With the classically designed Claremont tap head to match your Claremont basin tap, this bidet mixer tap will adorn your bidet. Although traditionally designed, this tap is packed with modern technology and will be supplied with a pop up waste for a fuss free purchase. This Claremont Bidet Mixer Tap comes with a ceramic disc cartridge that allows for quarter-turn operation for ease and simplicity, whilst giving a long life free from the annoying drip-drop of older style rubber washers. It will also supplied with a Neoperl Aerator for use with high water pressure and a Neoperl Flow Straightener for use with low water pressures. Now, no matter your water pressure, by using the Aerator or Flow Straightener on the bath spout, you can will get a consistent, steady flow of water, minimising splashing of water.
• Suitable for both high and low pressure water systems
• Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
• Comes with Ceramic Disc quarter turn technology
• Made from Brass and Chrome plated
• Pop up waste is included
• 10 year manufacturers guarantee
• Height: 152mm
• Width: 214.2mm
• Depth: 130.4mm
• Projection: 106.4mm
|Global Trade Item Number||5055806006683|
|Brand Range||Burlington Claremont|
|Popular Features||Waste Included|
|Cartridge TypeMore information||Ceramic Disc|
|Minimum Water PressureMore information||0.2|
|GuaranteeMore information||10 Years|
|Handle Type||Crosshead, Dual Control|
|Spout TypeMore information||Straight Spout, Fixed Spout|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.