Skip to navigation Skip to content

Burlington Claremont 3 Tap Hole Basin Mixer with Pop Up Waste

No reviews yet - Write one

RRP £370.00 save 31%

From £256.99 was £270.99

Please select an option

Receive as soon as tomorrow

Select an option to see delivery estimates

Pay 3 interest-free instalments of £85.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £64.25 with Clearpay Learn more about Clearpay

What's great about it?

  • Beautifully traditional 3 hole basin mixer tap with feature crosshead tap handles
  • Available in a standard or 3cm taller Regent size
  • Comes with a pop-up waste
  • Ceramic disc and Neoperl technology
  • 10 year manufacturer's guarantee

Read full product description


Recommended extras

We've hand-picked these items because they are a great choice alongside the Burlington Claremont 3 Tap Hole Basin Mixer with Pop Up Waste

Burlington Claremont 3 Tap Hole Basin Mixer with Pop Up Waste

Elegant 3 tap hole configurations are getting ever more popular and with the Claremont 3 Tap Hole Basin Mixer by Burlington, we can certainly see why. In the centre, your mixer spout will proudly sit with a beautiful pop-up waste lever that fits seamlessly into the design of the tap. On either side of the elegant spout will sit your hot and cold water valves with the classically designed Claremont tap heads with beautiful ceramic Burlington branded decorative caps. Burlington have also designed a Claremont range of bath and shower mixer taps so you can create a cohesive and designer look across your beautiful new bathroom.

Your new tap will continue to impress not only with its stylish looks but also, how easy and smooth it is to use thanks to the ceramic disc inside the valves. Ceramic disc technology also improves the durability of your tap, whilst also preventing the annoying drip-drop previously experienced with older style rubber washers, leaving you with a peaceful bathroom at last. You'll also receive a Neoperl Aerator and Flow Straightener to use with high and low water pressures respectively, giving you a consistent flow of water and minimising any splash back.

This basin mixer tap is available in a Regent option which is 3cm taller than the standard tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.

• Suitable for both high and low pressure water systems
• Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
• Comes with Ceramic Disc quarter turn technology
• Made from Brass and Chrome Plated
• Supplied with Pop-up waste
• 10 year manufacturers guarantee

Standard Dimensions:
Height: 125mm
Width: 248mm
Projection: 126mm

Regent Dimensions:
Height: 152mm
Width: 248mm
Projection: 126mm
Product Code CL12-PV
Type 3 Hole Basin Mixer Taps, Basin Mixer Taps
Width (mm) 248
Brand Burlington
Brand Range Burlington Claremont
Shape Curved
Mounting Type Deck Mounted
Popular Features Waste Included
Material Brass
Cartridge TypeMore information Ceramic Disc
Finish Chrome
Promotions Summer Sale
Style Traditional
Tap Holes 3 Holes
Projection (mm) 126
Minimum Water PressureMore information 0.2
GuaranteeMore information 10 Years
Handle Type Crosshead, Dual Control
Spout TypeMore information Straight Spout, Fixed Spout

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.

Receive as soon as tomorrow


Was £270.99

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.