We've hand-picked these items because they are a great choice alongside the Burlington Anglesey Basin Bridge Mixer Tap with Swivel Spout and Waste
Ingeniously designed, this bridge mixer will allow you to mix hot and cold water to suit your desired temperature, whilst the swivelling spout can be turned upwards giving you a drinking fountain or a better way to wash your face without splashing water over your shoulder and the floor!
You'll also feel the benefit of ceramic disc technology hidden inside this tap. Turning on and off your tap will be much easier and smoother, whilst staying leak free for longer, so you can finally say goodbye to the annoying dripping previously experienced with older taps. You'll also receive a Neoperl Aerator and a Neoperl Flow Straightener that you can optionally install if you have particularly high or low water pressures, to give you a steady flow of water, every time.
This tap also comes with a plug and linked chain waste - the perfect, traditional finishing touch for your basin. This basin mixer tap is also available in a Regent option which is 3cm taller than the standard tap. The Regent option creates an opulent feel and will ensure compliance with older building regulations.
- Suitable for both high and low pressure water systems
- Supplied with Neoperl Aerator for high pressure water flow, a Neoperl Flow Straightener for low pressure water flow and a Neoperl Key for installation
- Comes with Ceramic Disc quarter turn technology
- Swivelling spout when turned up can be used as a drinking fountain!
- Made from Brass and Chrome Plated
- Plug and Chain Waste included
- 10 year manufacturers guarantee
- Height: 137mm
- Width: 244mm
- Projection: 163mm
- Height: 167mm
- Width: 244mm
- Projection: 163mm
|Type||Basin Mixer Taps, Bridge Basin Mixer Taps|
|Brand Range||Burlington Anglesey|
|GuaranteeMore information||10 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
|Popular Features||Waste Included|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Tap Holes||2 Holes|
|Handle Type||Crosshead, Dual Control|
|Spout TypeMore information||Straight Spout, Swivel Spout|
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information||0.2|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.