We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial Tall Basin Mixer Tap
The simplistic single lever design gives you full control over water flow and temperature, whilst ceramic disc technology promises to prolong the life of your tap and prevent any dripping or leaks. This wonderful modern tall basin tap even boasts a 15 year manufacturer’s guarantee for some extra peace of mind when it comes to quality.
- Crosswater MPRO Industrial combines function with design in an industrial blend of modern and vintage
- 2 finish options: Unlacquered Brushed Brass or Polished Chrome
- Constructed from Brass for a reliable build
- Ceramic disc technology for a drip free tap
- Minimum pressure required: 1 bar
- Waste sold separately, please see our recommended extras
- 15 year manufacturer's guarantee (subject to online registration - please click here)
- Shop the full MPRO Range here
- Height: 351mm
- Width: 46mm
- Depth: 204mm
- Projection: 170mm
Important: This is available in an unlacquered/living finish that will change and patina over time. We advise that you do not pair with any other ranges of Brushed Brass (for example Crosswater MPRO Brushed Brass, VOS or Butler & Rose Beatrice) as the finishes will not match.
|Basin Mixer Taps, Tall Basin Mixer Taps
|Global Trade Item Number
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Spout TypeMore information
|Unlacquered Brushed Brass
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
Read these top cleaning tips from our very own expert to help save you time and effort around the home this year.
Looking to make some seasonal changes to your home? Here’s our tips on how to incorporate eco-friendly home improvements this autumn.
Love the elegance and style of a freestanding bath but wondering if you can have one in a small bathroom? Here’s everything you need to know.
Our Billy wall mounted vanity unit has caused quite a stir and for good reason! Functional, stylish and completely customisable. Take a closer look!
Showers upgrades are making our bathroom experience so much more exciting. Take a look at these 5 ways to upgrade your shower experience at home.
Don't let the current housing market bring you down. Here's 8 affordable home improvement ideas that are guaranteed to make you fall in love with your property again.
Have a look at this unusual trick that we recommend doing to cool down in a heatwave. It'll work, we promise! Plus our top 5 tips for surviving the hot weather.
Lofts can be difficult spaces to style due to low ceilings, cramped spaces and a lack of natural light. Luckily, our 3D bathroom designers have some great advice for how to work around awkwardly-shaped rooms to create the bathroom of your dreams.