We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial 3 Hole Wall Mounted Basin Mixer Tap
Wall mounted for a clutter-free bathroom aesthetic, this stylish basin tap offers a minimalist dual lever design giving you precise control over water flow and temperature, alongside ceramic disc technology to prevent any dripping or leaks and prolong the life of your tap. This stunning Crosswater tap promises a long lifetime of luxury that’s fully backed up by a reassuring 15 year manufacturer’s guarantee.
- Crosswater MPRO Industrial is a combination of modern design incorporating an industrial and vintage feel with functionality
- Wall mounted tap with lever control
- 2 finish options: Unlacquered Brushed Brass or Polished Chrome
- Modern 3 hole wall mount design
- Minimum recommended water pressure: 1 bar
- Waste not included please see recommended extras
- 15 year manufacturer's guarantee (subject to online registration - please click here)
- Depth: 210mm
- Projection: 199mm
Important: This is available in an unlacquered/living finish that will change and patina over time. We advise that you do not pair with any other ranges of Brushed Brass (for example Crosswater MPRO Brushed Brass, VOS or Butler & Rose Beatrice) as the finishes will not match.
|Type||3 Hole Basin Mixer Taps, Basin Mixer Taps|
|Brand Range||Crosswater MPRO|
|GuaranteeMore information||15 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Wall Mounted|
|Tap Holes||3 Holes|
|Handle Type||Round, Lever|
|Spout TypeMore information||Curved Spout|
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information||1|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.