-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended Extras
Hand-picked recommendations to go alongside this product
The Drench difference
Features:
Dimensions:
With Click-Clack Waste:
With Pop-Up Waste:
With iFix+ & Pop-Up Waste:
- Beautiful single lever basin mixer with a choice of click-clack waste, pop-up waste or pop-up waste with iFix+
- Made from brass with a chrome plated finish to add a modern touch to your bathroom
- FirmaFlow® uses improved Click Technology with a mechanical stop to limit tap water flow to just the amount required and assists in maintaining flow consistency, while reducing usage by up to 50%
- FirmaFlow® also uses ceramic disc cartridges which will save you money on your water bill and provide you with superior safety
- LightMove® technology helps provide finer temperature adjustment between 34°C and 42°C, ensuring easier handle movement and control
- Temperature limit stop is an adjustable setting that controls and limits the water temperature to your preference to avoid scalding. Ideal for family homes and provides peace of mind
- Economic 5L/min aerator - this is an environmentally friendly, removable feature which limits the maximum flow rate whilst fusing air into the water flow. This results in a soft and bubbly flow of water
- BlueStart delivers only cold water when the tap is in the middle position, making it an economical choice
- EasyFix® system allows one-man installation thanks to the preassembled components that ensures a faster, hassle-free installation and saves up to 30% of the installation time
- EasyFix®+ system (iFix+ option only) makes fitting quicker and easier than ever. It’s up to 50% faster than standard fitting, and 15% faster than the original EasyFix® system
- WRAS approved - this product is certified in compliance with the Water Regulations Advisory Scheme. To find out more information of the WRAS approval scheme, please see our blog post here
- Comes with flexible tails to simplify and speed up installation
- Suitable for all water systems including high pressure systems
- SmartShine® finish makes it easier than ever to clean thanks to the smooth lines and absence of recesses
- 5 year manufacturer's guarantee
Dimensions:
With Click-Clack Waste:
- Height: 146mm
- Width: 47mm
- Depth: 150mm
- Projection: 104mm
With Pop-Up Waste:
- Height: 146mm
- Width: 47mm
- Depth: 173mm
- Projection: 104mm
With iFix+ & Pop-Up Waste:
- Height: 146mm
- Width: 47mm
- Depth: 173mm
- Projection: 104mm
| Technical Specifications |
|---|
| Cleaning Instructions |
| Product Code | ideal-standard-ceraplan-mno-bsin-mxr-tap |
|---|---|
| Type | Basin Mixer Taps |
| Brand | Ideal Standard |
| Brand Range | Ideal Standard Ceraplan |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|---|
| AeratorMore information | Yes |
| Material | Brass |
| Temperature Control | Manual |
| Waste Type | Select an option first |
| Popular Features | Select an option first |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Shape | Curved, Square |
|---|---|
| Mounting Type | Deck Mounted |
| Finish Texture | Polished |
| Finish | Chrome, Polished Chrome |
| Style | Modern |
| Tap Holes | Mono |
| Handle Type | Lever, Single Control |
| Spout TypeMore information | Fixed Spout, Straight Spout |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
| Width (mm) | 47 |
|---|---|
| Height (mm) | 146 |
| Projection (mm) | 104 |
| Depth (mm) | Select an option first |
| Flow Rate at 0.2 Bar (l/min) | 1.4 |
|---|---|
| Minimum Water Pressure | Select an option first |
