We've hand-picked these items because they are a great choice alongside the Harbour Status Matt Black Tall Basin Mixer Tap
You'll be able to completely redesign the look of your bathroom simply by adding a Harbour Status tap. But if you are a lover of modern-day styling, then you are sure to fall in love with the sweeping bold look of this robust tall basin mixer. With it perfectly projecting over your countertop basin, this tap provides you with a statement piece that won’t go unnoticed. Expertly constructed from brass and with an easy to use lever design, this Harbour Status Matt Black Tall Basin Mixer Tap is guaranteed to quench your thirst for contemporary style.
Finally, as well as exceptional precision and quality being provided to you within this gorgeous range, you will also receive a helpful 10 year manufacturer’s guarantee too.
- Stylish tall basin mixer tap
- Made from Brass with a Matt Black finish
- Easy to use lever control
- Ceramic disc technology prevents any unwanted leaks or drips
- Minimum pressure required: 0.5 bar
- Match with one of our countertop basins for the ultimate look of luxury
- 10 year manufacturer’s guarantee
- Height: 314mm
- Width: 50mm
- Depth: 151.5mm
- Projection: 105mm
|Global Trade Item Number||5056585238623|
|Type||Basin Mixer Taps, Tall Basin Mixer Taps|
|Brand Range||Harbour Status|
|GuaranteeMore information||10 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Single Control|
|Spout TypeMore information||L-Shaped Spout, Fixed Spout|
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Flow Rate at 0.2 Bar (l/min)||4.7|
|Flow Rate at 0.5 Bar (l/min)||7.4|
|Flow Rate at 1 Bar (l/min)||10|
|Flow Rate at 1.5 Bar (l/min)||12.3|
|Flow Rate at 2 Bar (l/min)||14.2|
|Flow Rate at 3 Bar (l/min)||17.5|
|Minimum Water PressureMore information||0.5|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.