We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Single Lever Mini Basin Mixer Tap - Chrome
At a smaller dimension to standard basin taps, this mini monobloc is the perfect pairing to a smaller cloakroom basin, giving you plenty of room to wash your hands whilst leaving you space around the sink to display your soap. The rounded body elongates vertically to the traditionally designed lever that has advanced Ceramic Disc technology tucked away inside, making operation easy, smooth and drip free once turned off. The beautifully designed spout curves down to pour water elegantly into your basin.
Made from solid Brass, your new MPRO Mini Basin Tap also will come with a 15 year manufacturers guarantee so you can be sure your tap has been built to last. Crosswater have also designed a range of coordinating bath and shower taps so you can create a cohesive look across your home.
- Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
- Suitable for Medium and High Pressure systems only - minimum 0.5 bar water pressure is recommended
- Made from Brass with a Chrome plated finish
- Waste is sold separately
- WRAS approved
- 15 year manufacturer's guarantee
- Click here to shop the MPRO Chrome Range
- Shop the full MPRO Range here
- Height: 138mm
- Width: 46mm
- Depth: 123mm
- Projection: 92mm
|Global Trade Item Number
|Basin Mixer Taps, Cloakroom Basin Mixer Taps
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Lever, Single Control
|Spout TypeMore information
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Minimum Water PressureMore information
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.