Skip to navigation Skip to content

Britton Bathrooms Hoxton Thermostatic Shower Valve - Brushed Brass

No reviews yet - Write one

RRP £359.00 save 27%

£262.99

In stock | Get it tomorrow

Order by 4pm and select Next Day Delivery (S)

Delivery from £3.99. Spend £500+ for free delivery*. Read full delivery info

What's great about it?

  • Thermostatically controlled one outlet exposed shower valve
  • Brushed Brass finish
  • Minimum required water pressure: 0.5 bar
  • 15 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Britton Bathrooms Hoxton Thermostatic Shower Valve - Brushed Brass

Britton Bathrooms Hoxton Thermostatic Shower Valve - Brushed Brass


Features:
• Contemporary and minimalist exposed design
• Stunning Brushed Brass finish
• One outlet shower valve to pair with a slide rail shower kit
• WRAS and TMV2 approved
• Valve body crafted from solid brass
• Thermostatically controlled, regulates the temperature even if incoming temperature or pressure should fluctuate
• BS EN 1287 and BS EN 1111 compliant
• Minimum water pressure required: 0.5 bar
• Shower hose and shower kit sold separately, please see recommended extras
• Covered by a 15 year manufacturer's guarantee (subject to online registration - please click here)

Dimensions:
• Height - 66mm
• Width - 288mm
• Depth - 132mm
Product Code HOX.052BB
Global Trade Item Number 5055806046351
Type Exposed Shower Valves
Brand Britton Bathrooms
Brand Range Britton Bathrooms Hoxton
Minimum Water PressureMore information 0.5
Finish Brushed Brass
Number of OutletsMore information 1 Outlet
Material Brass
Shape Curved, Square
Style Modern
Temperature Control Thermostatic
Handle Type Round, Dual Control
Cartridge TypeMore information Ceramic Disc
Width (mm) 288
Height (mm) 66
Depth (mm) 132
Flow Rate at 0.5 Bar (l/min) 7.8
Flow Rate at 1 Bar (l/min) 11.8
Flow Rate at 2 Bar (l/min) 16.3
Flow Rate at 3 Bar (l/min) 19.6
Flow Rate at 5 Bar (l/min) 25.8
GuaranteeMore information 15 Years

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower. 

Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.