Skip to navigation Skip to content

Search

Concrete gets colourful... discover the basins with personality

Concrete gets colourful... discover the basins with personality

Best on a Budget

At Drench, we believe that a luxury bathroom design should be available to everyone. You don't have to spend a fortune to get a bathroom that looks a million dollars. Check out some of our more affordable bathroom fixtures below and prepare yourself for some serious inspiration...

Showing 73-108 of 323 products

Load Previous Products

You've viewed 108 of 323 products

Load More Products

Free Delivery Information
Returns Information
Help Hub

Back to top

This is the height and width of your shower tray. For shower trays with an irregular shape, such as quadrant shower trays, the size of the two straight sides is given.

This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower. 

Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.

Soil Pipe Direction:
This details which direction the soil pipe can run from the rear of the toilet.

Horizontal: the soil pipe can run directly into the wall behind the pan.

Vertical: the soil pipe can turn 90 degrees and run vertically into the floor.

Left or Right: the soil pipe can run either side from the rear of the pan, which is then typically boxed in.

This is for guidance only and not intended as a substitute for visual/physical checks; the size and type of your pan connector/pipework will have an impact on whether or not there is sufficient clearance.

This figure shows you how thick the glass in your mirror, shower enclosure or doors will be. Thicker glass will often be more robust, which helps it last longer.

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Maximum Adjustment

Sometimes one or two walls in the space you are planning on installing a shower door or enclosure may be ‘out of true’ or not perfectly straight. The maximum adjustment measurement indicates the highest ‘give’ a shower door or enclosure has to achieve a perfect fit.

Minimum Adjustment

Sometimes one or two walls in the space you are planning on installing a shower door or enclosure may be ‘out of true’ or not perfectly straight. The minimum adjustment measurement indicates the lowest ‘give’ a shower door or enclosure has to achieve a perfect fit.

 

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

This is the source of fuel your radiator or towel rail will use to provide heat. Radiators will generate heat through central heating systems, electricity, or a combination of both with dual fuel.

Central Heating:
These radiators will generate heat through the water pumped round your central heating system.

Electric:
Electric radiators contain fluid heated by an electrical element. They plug into a socket or are wired directly into the mains.

Dual Fuel:
Dual fuel radiators are able to run on both central heating and electric power. They contain a ‘summer’ heating element which will allow you to use your radiator in warmer months without needing to turn on your entire central heating system.

BTU (British Thermal Units) is a measure of the heat output of radiators. ∆t 50ºC is the standard output of boilers in the UK & Europe, so this figure is an indication of the heat output (BTU) your radiator will give you at this standard temperature. To find out the BTU you need for rooms in your home, take a look at our BTU Calculator.

BTU (British Thermal Units) is a measure of the heat output of radiators. ∆t 50ºC is the standard output of boilers in the UK & Europe, so this figure is an indication of the heat output (BTU) your radiator will give you at this standard temperature. To find out the BTU you need for rooms in your home, take a look at our BTU Calculator.

BTU (British Thermal Units) is a measure of the heat output of radiators. ∆t 60ºC was previously the standard output of boilers in the UK (the UK has now aligned with the rest of Europe to use ∆t 50ºC). BTU ∆t 60ºC is an indication the output in BTU your radiators will give you at this standard temperature. To find out the BTU you need for rooms in your home, take a look at our BTU Calculator.

Watts is a measure of heat output used for electric radiators, with a higher watt figure meaning a higher heat output. Purchasing a radiator that has the correct wattage will ensure your room will be at a comfortable temperature without wasting energy.

By using our BTU Calculator,you can calculate the number of watts your radiator needs to adequately heat your room.

Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.

This is the distance between the centre of the two pipe inlets on your radiator or towel rail. This figure is an indication of where the two pipes for your radiator will need to go and can be helpful if you want to install a radiator using your existing pipes.

Columns are the hollow tubes arranged in rows which fill with water to generate heat. The number of columns indicates how many of these tubes your radiator has.

This figure is an indication of depth, not the number of visible columns. For example: a radiator which has 2 columns will have one column in front of the other across the whole radiator.

A higher number of columns means a radiator will have a larger depth measurement and give off more heat than a comparable radiator with fewer columns.