We've hand-picked these items because they are a great choice alongside the Roper Rhodes Sign Waterfall Basin Mixer with Click Waste
This tap also features an adjustable temperature and flow limiter helping to save water and be kinder to the environment. This tap comes supplied with a click waste, requires a minimum water pressure of 1.0 bar and has a 10 year manufacturer's guarantee.
- Quarter turn ceramic technology - easy to use and no-drips
- Slotted click waste included
- Flow rate adjustment and temperature control using the lever
- Minimum of 1.0 bar water pressure required
- 10 year guarantee from Roper Rhodes
- Height: 175mm
- Width: 55mm
- Depth: 150mm
- Projection: 124mm
|Global Trade Item Number||5016519178722|
|Type||Basin Mixer Taps|
|Brand Range||Roper Rhodes Sign|
|GuaranteeMore information||10 Years|
Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Single Control|
|Spout TypeMore information||Waterfall Spout, L-Shaped Spout, Fixed Spout|
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
|Flow Rate at 0.5 Bar (l/min)||4.2|
|Flow Rate at 1 Bar (l/min)||5.8|
|Flow Rate at 2 Bar (l/min)||6.1|
|Minimum Water PressureMore information||1|
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
If you're unsure on the specifics of how to descale and clean your tap cartridge, look no further than this handy guide. You're bound to be an expert on cleaning tap cartridges at the end of this article so knuckle down and get ready for some super useful knowledge!
Nowadays, the vast majority of modern bathroom and kitchen taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off.