Skip to navigation Skip to content

Crosswater MPRO Industrial Basin Mixer Tap - Unlacquered Brushed Brass

No reviews yet - Write one

RRP £299.00 save 30%

£207.99 was £218.99

In stock | Get it tomorrow

Order by 4pm and select Next Day Delivery (S)

Delivery from £3.99. Spend £500+ for free delivery*. Read full delivery info

Pay 3 interest-free instalments of £69.33 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £52.00 with Clearpay Learn more about Clearpay

What's great about it?

  • An industrial blend of modern and vintage
  • Unlacquered brushed brass finish - ages and changes colour over time
  • Minimum water pressure of 0.5 bar
  • 15 year manufacturer's guarantee

Read full product description


Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial Basin Mixer Tap - Unlacquered Brushed Brass

Crosswater MPRO Industrial Basin Mixer Tap - Unlacquered Brushed Brass

For a truly mesmerising splash of the sublime in your bathroom, take a look at the stunning Crosswater MPRO Industrial basin mixer tap. Boasting a captivating urban textured design, alongside a luxurious brushed brass finish, nothing else makes a statement in the bathroom quite like it. What’s more, that elegant brushed brass finish is also unlacquered, meaning it’s designed to oxidise and develop an aged pattern over time for an even more stunning vintage look.

The MPRO’s minimalist lever design gives you full control over water flow and temperature, whilst ceramic disc technology works to prolong the life of your tap and prevent any unwanted dripping. Pair with the full MPRO Industrial brushed brass range to complete the look, and rest easy knowing you’re backed up by that comforting 15 year manufacturer’s guarantee.

Crosswater MPRO combines function with design in an industrial blend of modern and vintage
Unlacquered Brushed Brass finish is designed and manufactured to oxidise over time which will result in a change of colour and a unique industrial look to give even more personality to your bathroom
Lever control
Deck mounted
Minimum water pressure required: 1 bar
Ceramic disc cartridge
Waste not included, please see recommended extras
15 year manufacturers guarantee

Important: This is an unlacquered/living finish that will change and patina over time. We advise that you do not pair with any other ranges of Brushed Brass (for example Crosswater MPRO Brushed Brass, VOS or Butler & Rose Beatrice) as the finishes will not match. Instead, pair with the Industrial range..

Height: 159mm
Width: 46mm
Depth: 145mm
Projection: 112mm
Product Code PRI110DNUB
Type Basin Mixer Taps
Global Trade Item Number 5055833691784
Width (mm) 46
Height (mm) 159
Depth (mm) 145
Brand Crosswater
Brand Range Crosswater MPRO - Brushed Brass
Shape Curved
Mounting Type Deck Mounted
Cartridge TypeMore information Ceramic Disc
Finish Unlacquered Brushed Brass
Promotions Summer Sale
Style Modern
Tap Holes Mono
Projection (mm) 112
Minimum Water PressureMore information 1
GuaranteeMore information 15 Years
Handle Type Round, Lever
Spout TypeMore information L-Shaped Spout

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.