£129.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Core Deck Mounted Bath Filler
- Modern deck mounted bath filler available in 3 striking finishes: Chrome, Matt Black or Brushed Brass
- Crafted from brass for durable and solid construction
- Ceramic disc technology prevents excess dripping and leaking
- Aerated spout mixes air into the water to give a soft, 'champagne-like' flow
- 0.5 bar minimum operating water pressure - please see the specification box below for flow rates
- WRAS approved
- Supplied with two handle options: a diamond cross-hatch/knurled detail handle and a smooth handle, allowing you to customise the look of your new tap
- Bath waste sold separately - please see our recommended extras
- Covered by a lifetime manufacturer’s guarantee
Dimensions:
- Height: 130.5mm
- Width: 230mm
- Projection: 119.96mm
Cleaning Instructions |
---|
Product Code | NU-007 |
---|---|
Type | Bath Fillers |
Brand | Drench |
Brand Range | Drench Core |
GuaranteeMore information | Lifetime |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Ceramic Disc |
---|---|
AeratorMore information | Yes |
Number of OutletsMore information | 1 Outlet |
Material | Brass |
Temperature Control | Manual |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
This indicates how many water outlets you can pair with your shower valves. Choosing valves with more outlets will give you flexibility over the number of products you can add to your shower.
Each outlet from your shower valve will divert water to the section of your shower that needs it, so each extra outlet allows you to add another product. For example: with 1 outlet you could have just a fixed shower head. 2 outlets will allow you to have a fixed shower head and shower handset. 3 will allow both of these with the addition of a body jet.
Shape | Curved |
---|---|
Mounting Type | Deck Mounted |
Style | Modern |
Tap Holes | 2 Holes |
Handle Type | Dual Control, Lever |
Spout TypeMore information | Curved Spout, Fixed Spout, L-Shaped Spout |
Finish Texture | Polished |
Finish | Chrome |
Tap spouts are available in a variety of different styles which have an effect on both the look and function of your tap. Different spout types will have different heights and projections, so it’s important to choose one which will complement your basin or bath.
Width (mm) | 230 |
---|---|
Height (mm) | 131 |
Projection (mm) | 120 |
Flow Rate at 0.5 Bar (l/min) | 7 |
---|---|
Flow Rate at 1 Bar (l/min) | 9.8 |
Flow Rate at 2 Bar (l/min) | 13.6 |
Flow Rate at 3 Bar (l/min) | 16.7 |
Minimum Water PressureMore information | 0.5 |
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
Advice guides
-
How to Descale and Clean a Tap Cartridge
If you're unsure on the specifics of how to descale and clean your tap cartridge, look no further than this handy guide. You're bound to be an expert on cleaning tap cartridges at the end of this article so knuckle down and get ready for some super useful knowledge!