Skip to navigation Skip to content

Categories

Loading�
Searching...

Products

Loading�
Searching...

Content

Loading�
Searching...

Toilet & Basin Bathroom Suites

Welcome to our Toilet & Basin Bathroom Suites collection, where simplicity meets sophistication. Perfect for those looking for a practical yet stylish solution, these suites combine high-quality toilets and basins to create a cohesive and efficient bathroom. Whether you're renovating a compact cloakroom or updating your main bathroom, our curated selection of suites provides you with everything you need for a seamless, coordinated bathroom.

Back to top

Soil Pipe Direction:
This details which direction the soil pipe can run from the rear of the toilet.

Horizontal: the soil pipe can run directly into the wall behind the pan.

Vertical: the soil pipe can turn 90 degrees and run vertically into the floor.

Left or Right: the soil pipe can run either side from the rear of the pan, which is then typically boxed in.

This is for guidance only and not intended as a substitute for visual/physical checks; the size and type of your pan connector/pipework will have an impact on whether or not there is sufficient clearance.

Water Inlet Location:

This is the location where the mains water feed can connect to the cistern, when viewed from the front.
Cisterns that feature Bottom Left & Right inlets are usually supplied with a plug to seal the inlet which isn't used.

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Maximum Adjustment

Sometimes one or two walls in the space you are planning on installing a shower door or enclosure may be ‘out of true’ or not perfectly straight. The maximum adjustment measurement indicates the highest ‘give’ a shower door or enclosure has to achieve a perfect fit.

Minimum Adjustment

Sometimes one or two walls in the space you are planning on installing a shower door or enclosure may be ‘out of true’ or not perfectly straight. The minimum adjustment measurement indicates the lowest ‘give’ a shower door or enclosure has to achieve a perfect fit.